Reporting gaps
If the equipment stops measuring during an outage, that period has no data. For the DGA, a gap counts as a failure to transmit.
SOLUTIONS / FLOW
Narrowbits FLOW · Water and DGA compliance
Telemetry for wells, tanks, and networks, with automatic DGA reporting straight from the site. Logging continues even if power or signal is lost.
NB sensors: NBdga · NBwater · NBpulse

The problem
If the equipment stops measuring during an outage, that period has no data. For the DGA, a gap counts as a failure to transmit.
No one knows whether the pump is running, the water table has dropped, or there's a leak until someone goes out to the well to check.
Failing to meet monitoring and transmission obligations exposes the water rights holder to penalties.
| Scenario | Cloud only | With NBnano |
|---|---|---|
| Cellular signal outage | No record for the period | Keeps measuring and storing |
| Power outage at the well | No data, no alarm | Runs on DC-UPS |
| Link recovery | The period stays blank | Forwards the backlog |
| DGA reporting | Dependent on the cloud | Sent from the well |
| Audit of the period | Failure to transmit | Complete data series |
How it works
Interactive scenario
Well 2 of a rural water system (APR). The pump runs at 2.1 l/s and DGA reporting is up to date.
Want to see the full APR dashboard? Book a demo.
What we measure

Case · Water resources
Eight extraction wells in open terrain, with continuous transmission required. Level, flow rate and volume telemetry, local logging on NBnano, remote supervision and a monthly technical report.
Service tiers
DGA compliance with NBnano, mains-powered.
Everything in Lite, with no gaps from power outages.
Well, tank, distribution network, energy and control.
Services
Supervision, review of points with no data, incident handling and technical support.
Historical data, events and reports for reviews and audits.
Periodic summary of relevant changes, alerts and open items.
Frequently asked questions
In many cases, yes. It connects via pulse, Modbus or 4–20 mA, as long as it meets the required range and accuracy. We confirm this during the technical assessment.
With the Continuity tier, NBnano runs on a DC-UPS and battery: it keeps measuring and logging through the outage.
Yes. Registration as a DGA reporting party and setup of automatic reporting are part of the service.
You need a link to transmit, but if it drops, NBnano stores the data and resends it when the signal returns.
DGA self-assessment · 4 questions
1. Do you hold groundwater use rights?
Technical assessment (free)
Well visit, category assessment and a fixed-scope proposal.